Search found 35 matches
- Sat Sep 07, 2019 8:09 am
- Forum: Technical Talk
- Topic: Steering Column/Turn Signal Switch *Again*
- Replies: 6
- Views: 11151
Re: Steering Column/Turn Signal Switch *Again*
@Otto Skorzeny, thank you so much for taking the time to respond. I will follow up on your suggestion. Many thanks!!
- Tue Sep 03, 2019 3:21 pm
- Forum: Technical Talk
- Topic: Steering Column/Turn Signal Switch *Again*
- Replies: 6
- Views: 11151
Steering Column/Turn Signal Switch *Again*
Hello Members, I appreciate any insight anyone can give in advance. Unfortunately as of August 2019, I have been coming back to the forum with the same issue for 10 years... I have a '67 Toronado with the tilt-telescoping column. Ongoing, continuing electrical problem with the turn signal switch-no ...
- Mon May 16, 2016 3:06 pm
- Forum: Technical Talk
- Topic: '67 4 BBL Bowl/Throttle Body Removal
- Replies: 6
- Views: 7298
Re: '67 4 BBL Bowl/Throttle Body Removal
I can't thank you enough, Otto! Lots to digest that should help me out. Have a good day.
- Mon May 16, 2016 12:38 pm
- Forum: Technical Talk
- Topic: '67 4 BBL Bowl/Throttle Body Removal
- Replies: 6
- Views: 7298
Re: '67 4 BBL Bowl/Throttle Body Removal
Thanks a lot Otto, I appreciate you going to the work to find that. Interesting-I do have the '67 Toro shop manual (it is a Rochester 4MV) and literally, verbatim, the instructions for separating the bowl and throttle body are: "Remove throttle body by removing throttle body to bowl attaching s...
- Mon May 16, 2016 9:52 am
- Forum: Technical Talk
- Topic: '67 4 BBL Bowl/Throttle Body Removal
- Replies: 6
- Views: 7298
'67 4 BBL Bowl/Throttle Body Removal
Hello all. I'm a novice mechanic and this is probably a novice question. I am finally going to try to seal the fuel plugs and I 100% have the symptoms that they are leaking. Running very rich & rough and hot restarts are terrible. I have the carb off and disassembled everything obvious. I remove...
- Thu Sep 18, 2014 7:49 am
- Forum: Technical Talk
- Topic: '67 Running Extremely Rich
- Replies: 6
- Views: 12207
Re: '67 Running Extremely Rich
Schurkey-thank you for your response and sorry for the delay. I'm willing to look into any possibility. My apologies for calling the carb "brand new". It was rebuilt but done nicely. I bought it from the guy that calls himself "Rocket Scientist" from Lansing, MI. It is a model nu...
- Wed Sep 03, 2014 6:30 am
- Forum: Technical Talk
- Topic: '67 Running Extremely Rich
- Replies: 6
- Views: 12207
Re: '67 Running Extremely Rich
Bruce and Mike,
Thank you for the advice! Sorry for the late reply, I was completely away from electronics for almost a week. Which really isn't a bad thing.
Thanks again, we'll take a look at these things.
Roy T
Thank you for the advice! Sorry for the late reply, I was completely away from electronics for almost a week. Which really isn't a bad thing.
Thanks again, we'll take a look at these things.
Roy T
- Thu Aug 28, 2014 8:30 am
- Forum: Technical Talk
- Topic: '67 Running Extremely Rich
- Replies: 6
- Views: 12207
'67 Running Extremely Rich
Hi everyone, and I appreciate any advice in advance. Have a '67, when I bought it we discovered someone had installed a carb for a 455 engine on it. I bought a brand new "4MV" carb. When received we took it apart, everything looked new, verified jets were proper and reassembled. The reason...
- Tue Sep 11, 2012 4:32 am
- Forum: Technical Talk
- Topic: '66/'67 Choke "Stove Coil"
- Replies: 4
- Views: 8509
Re: '66/'67 Choke "Stove Coil"
Jamin,
Sorry for the late response. Send me an e-mail at rt8992@gmail.com and I'll get back to you ASAP.
Thanks.
Sorry for the late response. Send me an e-mail at rt8992@gmail.com and I'll get back to you ASAP.
Thanks.
- Fri Aug 24, 2012 7:57 am
- Forum: Technical Talk
- Topic: '66/'67 Choke "Stove Coil"
- Replies: 4
- Views: 8509
Re: '66/'67 Choke "Stove Coil"
Well good news for me, I found another post on the forums for someone selling an engine from a '66. Unbelievably he still had the choke coil on the manifold. Just hoping now that it works :). But if anyone has leads I'd still like to hear them in case this one doesn't work or another one is needed i...