Toronado.org

Hi all,
I have a 1967 Toronado that is not in driver shape (Beyond my ability to restore), but has a lot of good parts otherwise. I am willing to part out if anyone has specific needs. I would particularly be interested in trading 67 parts for 66 or 68 parts. I am restoring both a 66, and a 67, and would like parts for either of them.

aaronds@pgtc.com

Thanks.

Aaron

Aaron,

I can think off the top of my head, of a few things that may be on this car. I need the plastic splash corners that are on the bottom side of the front frame area. They have kind of grid pattern and are 90 degree corners. If the splash cover that goes in the center is any good, I'd be interested in that also. I probably have some other items, but just could start with this. Just look under the front fenders, front of the frame.

And welcome to the Toro Club! Look forward to seeing some pictures of your family's 68 Toro. Just looked at a 69 W-34 that another member living nearby bought a couple of weeks ago. Numbers matching.

Thanks for the welcome.

I will look at these parts, hopefully late today. Otherwise it will be next week sometime since I will be out of town this weekend. I can't say I have actually ever looked at those, so I don't know the qaulity. I'll let you know.


Aaron

Arkyguy wrote:Hi all,
I have a 1967 Toronado that is not in driver shape (Beyond my ability to restore), but has a lot of good parts otherwise. I am willing to part out if anyone has specific needs. I would particularly be interested in trading 67 parts for 66 or 68 parts. I am restoring both a 66, and a 67, and would like parts for either of them.

aaronds@pgtc.com

Thanks.

Aaron

Hi Aaron,

I would be interested in a few items if you have them:
-Original jack if complete.
-AM/FM Radio with knobs
-Deluxe wheel covers
-Carb - 7027131
-Head light vacuum check valve

Let me know, thanks.

Mark

RE Doc Hubler:

I did look this weekend, and the the plastic splash corners you speek of are missing. THe center one is there, but has considerable abrasion. I don't think that is at all uncommon given the low stance of these cars.
Sorry I couldn't help.

Aaron

RE ydennekkram

I will look on Thursday - until then my evenings are full.

-Original jack if complete. - I think complete, but without the foam and box.
-AM/FM Radio with knobs - Not sure if it AM/FM, or AM only
-Deluxe wheel covers - Are the deluxe the full covers? I do have those. Not sure of condiiton, but will look and report back. If I have them, I wil post pictures, so you can judge quality, and make sure they are what you need.
-Carb - 7027131 - I have the carb, but I will need to verify #. I cannot speak for condition, except that it would probably need to be rebuilt. I will verify no physical damage.
-Head light vacuum check valve - will look at the condition and report back.

Thanks,
Aaron

Hi folks, I did go out to look for the parts this weekend, and could not open the doors. It had sunk in the dirt. I will have to get the tractor, and pull it into my shop. Be patient with me.

Thanks,
Aaron

If you have pictures of instrument cluster I would
be interested in that.

Thanks
Ross

Hi Aaron,

Any luck with any of this or are you still stuck in the mud

I did get it out of the mud. I have been very busy at work though. sorry. It has the am only radio. the jack is not complete. Not sure what the deluxe covers look like, but I do have complete set. I will try too send pictures soon. Also, not sure where the #'s on the carb are, but I will try to remove, and look soon.

Thanks,

Aaron