chopping up my 66 parts car

All parts for sale may be listed here by forum members.
duwen10
Posts: 9
Joined: Sat Feb 04, 2012 9:57 pm
TOA Membership Number: 0
Years Owned: 66 toronado

chopping up my 66 parts car

Postby duwen10 » Mon Apr 07, 2014 7:48 pm

As my time allows I will be chopping up my parts car. It has the telescoping steering wheel with cornering lights, cruise, rear defrost, manual windows. The back glass was broken out when I got the car. Most of the rear end is toast. I will check back in as I can. Email works best for contacting. Thanks

User avatar
Doc Hubler
Posts: 363
Joined: Thu Sep 27, 2012 9:37 pm
TOA Membership Number: 992
Years Owned: 1967

Re: chopping up my 66 parts car

Postby Doc Hubler » Mon Apr 07, 2014 8:02 pm

Don't know if there's any possibility. do you have the plastic corners on lower front end? They were black plastic splash panels on each front side. In the center was a rubber apron as well (also served as an air dam as well perhaps). I have one that is still intact, the other was broken. I will see if I can find a picture of one if that's helpful. Thanks!

User avatar
Trailrunner
Posts: 22
Joined: Sun Dec 23, 2012 9:27 am
TOA Membership Number: 0
Years Owned: !967 Toronado
Location: Bend,Oregon

Re: chopping up my 66 parts car

Postby Trailrunner » Wed Apr 09, 2014 7:05 am

I'm interested in dash parts. If you have pictures of the instrument
panel, ac on the dash , etc. and other assorted parts.
Also interested in anything comfortron.
Thanks
Ross

duwen10
Posts: 9
Joined: Sat Feb 04, 2012 9:57 pm
TOA Membership Number: 0
Years Owned: 66 toronado

Re: chopping up my 66 parts car

Postby duwen10 » Fri Apr 11, 2014 4:48 am

I will be at the location where I store my parts car today or tomorrow and will get the requested photos. Sorry about the delay in response. My work has been crazy lately.

Zeppelin
Posts: 16
Joined: Fri Apr 04, 2014 9:44 am
TOA Membership Number: 0
Years Owned: 1969 Oldsmobile Toronado

Re: chopping up my 66 parts car

Postby Zeppelin » Fri Apr 11, 2014 12:04 pm

You wouldn't happen to have the front metal skirt that goes under the front bumper.... Some idiot tryied to pulling mine with a chain :shock:

User avatar
Otto Skorzeny
Posts: 1721
Joined: Fri Feb 28, 2014 12:41 pm
TOA Membership Number: 0
Years Owned: 1966 Toronado

Re: chopping up my 66 parts car

Postby Otto Skorzeny » Sat Apr 12, 2014 1:02 pm

Hi duwen,

I sent you a couple of requests via email but don't know if you got them.

Need:

Metal wiper blades
Umbrella shaped hood bumper
Z shaped metal trim for both arm rests
Lug wrench and jack hold down parts
Trans kickdown switch

What does the carburetor look like? Might be interested in a spare.


Return to “For Sale: Parts”

Who is online

Users browsing this forum: No registered users and 14 guests