Master Power Window Control Unit
Master Power Window Control Unit
I am able to raise and lower drivers side window and lower the passenger window. I cannot raise the passenger window or or lower the rear windows from the master control. These windows can be operated with their individual control levers. To check the master control switch/wiring, do I have to remove the inside door panel or is the unit accessable from the outside. 1968 Toronado.
- Otto Skorzeny
- Posts: 1720
- Joined: Fri Feb 28, 2014 12:41 pm
- TOA Membership Number: 0
- Years Owned: 1966 Toronado
Re: Master Power Window Control Unit
I'd be willing to bet that the conections on the master control just need to be cleaned /wire brushed/emery cloth/etc.
Re: Master Power Window Control Unit
My thoughts as well. Can I remove the control unit from inside or do I have to remove the door panel to inspect it?
- Otto Skorzeny
- Posts: 1720
- Joined: Fri Feb 28, 2014 12:41 pm
- TOA Membership Number: 0
- Years Owned: 1966 Toronado
Re: Master Power Window Control Unit
My car has roll up windows so I don't know.
-
- Posts: 125
- Joined: Thu Apr 04, 2019 6:39 pm
- TOA Membership Number: 0
- Years Owned: 1966 Toronado
1951 Cadillac
1957 Pontiac
1965 Impala
Re: Master Power Window Control Unit
Not sure about the 68 but the master switch in the 66 can be removed without removing the door panel.
Re: Master Power Window Control Unit
Thanks, I'll try it.
Who is online
Users browsing this forum: No registered users and 77 guests