Does anyone know where I can purchase a full drivers side mat for a 1966 Olds toronado deluxe?  I have the pan.
Thanks
Ralph Mesite
ralph@villacapri.com
			
									
									
						Drivers side mat
- 
				
				Toronadotrofeo
- Posts: 83
- Joined: Wed Nov 09, 2016 1:17 pm
- TOA Membership Number: 24
- Years Owned: 1966 toronado 
 1981 toronado
 1990 toronado
 1991 toronado
 1992 toronado
Re: Drivers side mat
There was a company that made them but the Mould caught fire
			
									
									
						- Otto Skorzeny
- Posts: 1716
- Joined: Fri Feb 28, 2014 12:41 pm
- TOA Membership Number: 0
- Years Owned: 1966 Toronado
Re: Drivers side mat
As far as I know you can't get the correct mat.  You'll have to improvise.  McMaster-Carr sells sheet rubber mats with lands and grooves that you can cut to fit.
https://www.mcmaster.com/#
You'll probably have to find the closest match here: https://www.mcmaster.com/#floor-mats/=19nx8v5
			
									
									
						https://www.mcmaster.com/#
You'll probably have to find the closest match here: https://www.mcmaster.com/#floor-mats/=19nx8v5
- Otto Skorzeny
- Posts: 1716
- Joined: Fri Feb 28, 2014 12:41 pm
- TOA Membership Number: 0
- Years Owned: 1966 Toronado
Re: Drivers side mat
Here are the ribbed traction mats.
Scroll down to Traction Mats with the diamond tread design. Click on that. Then at the top of the page, 4th picture over is a ribbed mat. Click on that photo and you'll see the the sizes its available in. It's a decent approximation if your existing mat is unusable.
https://www.mcmaster.com/#floor-mats/=19nxoln
			
									
									
						Scroll down to Traction Mats with the diamond tread design. Click on that. Then at the top of the page, 4th picture over is a ribbed mat. Click on that photo and you'll see the the sizes its available in. It's a decent approximation if your existing mat is unusable.
https://www.mcmaster.com/#floor-mats/=19nxoln
- Otto Skorzeny
- Posts: 1716
- Joined: Fri Feb 28, 2014 12:41 pm
- TOA Membership Number: 0
- Years Owned: 1966 Toronado
Re: Drivers side mat
Let us know what you finally do about your mat and post pictures.
Mine looks good at a glance but has shrunken around the edge by 3/8" to 1/2" and has a small tear where your heel rests.
I intend to use the McMaster-Carr product unless something better is found.
							Mine looks good at a glance but has shrunken around the edge by 3/8" to 1/2" and has a small tear where your heel rests.
I intend to use the McMaster-Carr product unless something better is found.
- Attachments
- 
			
		
				- DSC03920.JPG (399.82 KiB) Viewed 9504 times
 
Who is online
Users browsing this forum: No registered users and 26 guests
